Cutting Sink Hole In Quartz Countertop. Place your guide track (fence) next to the rotary cutter. My sink was rectangular and had relatively sharp corners.
How to cut a quartz countertop method 1 method 1 of 3: The best way to cut quartz countertops is to use a circular saw with diamond tips for the job. Quartz countertops are very durable, but they can be difficult to cut.
Method 2 Method 2 Of 3:
Remember that quartz is one of the hardest materials out there. Begin drilling at slow speed. “your assistant will help support the piece being cut so the weight of it doesn’t prematurely.
Next, You Need To Mark The Cabinets.
Use a degreaser to remove the grease. The countertop fabricator cut the hole in my quartz countertop too close to the sink. Using regular blades may not be effective or result in a lousy job.
An Old Or Dull Blade Can Chip The Laminate Along The Cutting Line.
Place the bit into your drill and press the bit slightly into the hole. I was unable to cut completely through the slab at the corners due to the geometry of the blade being round. Always, always, always use a new jigsaw blade.
The Debris Or Powder Of Quartz Is Fine And Can Be Irritating To The Eyes, Nose, Mouth, And Skin.
Show activity on this post. Using your circular saw for straight cuts download article. Rest your rotary cutter on the solid surface material, with the blade extended into one of the pilot holes.
Put On Your Protective Eyewear And.
Place your guide track (fence) next to the rotary cutter. Another less precise way would be to. Drilling quartz countertops usually require a diamond hole drill bit because it is not as likely to chip or damage the top due to heat.
Komentar
Posting Komentar